Spark plugs are the parts which need to be replaced timely during the routine servicing. Most of the times, this can be done without any problems but there are times when your spark plug will seize. If a spark plug seizes, it becomes a bit tricky to get it out as then it becomes a fragile component. The worst case scenario in this becomes when your spark plug snaps if it is forced too much. In this case, you will have to face with a big repair bill. Luckily, we have discovered some ways for you to reduce the risk of seized spark plugs.
Why Does A Spark Plug Seize?
Spark plugs are the devices fitted mostly in all petrol-powered cars. They ensure that the air-fuel mixture which is pushed into the engine’s cylinder is ignited. As these devices are exposed to extreme heat inside the engine, there are chances that they can deteriorate rapidly. The chances of this become high when the engine is not running as smoothly as it should.
Carbon build up is one of the major reasons for the seizing of your spark plugs. This situation occurs when the engine does not run at an optimal level. The carbon builds up around the tip of the spark plug inside the cylinder which prevents you from removing it.
Apart from this, corrosion is another reason for the seizing of spark plugs. This is usually caused by engine fluids or water from outside. These fluids will slowly affect the areas in and around the spark plug threads and start to corrode.
1. To avoid your spark plugs from seizing, the top most tip is to ensure that you take utmost care when replacing them. As they are a vital part of the engine, they must be replaced by a professional.
2. In many cases, the spark plugs can also be treated with the anti-seize lubrication. They help in reducing the risk of plug seizing.
3. You must also make sure that your spark plugs and threads are dry from any fluids before they are put in the engine.
4. You must make sure to replace oil and filters regularly and use good quality petrol.